To install the Tippy APP on your smartphone, you must download it from the Google Play Store for the Android operating system and the Apple Store for the iOS operating system and follow the installation instructions. Or you can scan the QR code at the back of the manual for a direct connection to the stores.
In case of first use, follow the instructions on the tutorial in the APP or in the manual, ensuring that at that precise moment Tippy is not already associated with another smartphone near you.
If the Tippy has already been associated at least once, try to proceed with the instructions below:
Verify that the Tippy has not been deleted; Switch the Bluetooth of your smartphone off and on again; Close the APP; Switch your smartphone off and on again; Check the system requirements indicated in the store. For more details see the instruction manual.
You should verify that the E-mail that was sent to you has not been moved into SPAM or junk mail from your E-mail system. If the E-mail is not present even into SPAM, try requesting a new password within the app or write an email to technical support at email@example.com Alternatively, if you prefer, you can access the app through Facebook or Google social logins.
Make sure that the cushion is not covered by other objects (cushions, safety belts, toys), and that it is not excessively curved. If you continue to detect the problem please contact technical support, you can find all the contacts on the official website or by writing directly to the email address: firstname.lastname@example.org indicating the serial number of the product.
Si è possibile. Accedendo all’App con lo stesso account, le informazioni registrate su un telefono (nome del bambino, numeri telefonici di emergenza etc.) verranno automaticamente visualizzate anche su un altro telefono. Anche in questo caso due telefoni non possono simultaneamente gestire lo stesso Tippy Pad per ragioni di sicurezza.
From the moment only one of the phones connects to the Tippy Pad, if the parent who leaves the vehicle with the other parent on board is connected to the device, he will receive the 1st level alarm which he will simply have to silence. At the same time, the other parent’s phone will be connected to a tippy pad and will take over the management of the device.
The device battery lasts 4 years (with daily use of two hours). Once the requirement is fulfilled, the battery will have reached its end of life. The battery is neither rechargeable nor replaceable. Once the battery has been used up, a replacement battery can be purchased that will extend the life of the product for another 4 years. The company has made this choice for a matter of safety towards consumers, so that replacing or recharging it does not compromise its functionality being an electronic product.
Yes, as long as the tippy pad detects the presence of the child, it will remain active and consume battery power. How do I know if the battery of the tippy pad runs out? If the battery is low, the user will be notified by a message in the app and will also be able to see the low battery icon of the associated tippy pad.
The device exploits only the low energy bluetooth technology with a 2.4 – 2.485ghz frequency band. It is ce certified to be used without danger of radiation.The device uses exclusively low energy bluetooth technology with frequency band 2.4 – 2.485ghz. It is certified to be used without danger of radiation. It has also undergone specific tests (sar) that have shown values far below the terms of the law.
Try turning the Bluetooth on/off and performing the pairing procedure again. If you continue to have problems, please contact the technical support, you can find the contacts on the official website or by writing an email to the address: email@example.com indicating the serial number of the product.
Tippy Pad is equipped with a pressure presence sensor. Provided that the seat of the seat is able to comfortably accommodate the cushion, the device can be considered compatible and installable on all car seats. There is no weight limit. The device is therefore suitable for use with children up to 12 years of age and with a height of less than 150 cm.
The notification sms are sent through a virtual sms server that is activated by the management server of the Tippy app. Whenever the first level of audible alarm is ignored, the app communicates with the server (via web) which asks the virtual sms server to send a message to the numbers entered in the telephone contacts of the Tippy Pad. No cost for this type of service, regardless of the telephone operator, is expected to be borne by the customer.
For emergency messages to be sent, the user’s data network must be active. If the user is in an area with low network coverage, the messages will start as soon as coverage is resumed. In any case, the app will still be able to receive sound notifications via Bluetooth. Furthermore, we remind you that the decree law n.122 of October 2, 2019 on anti-abandonment devices does not oblige the devices to send calls or emergency messages.
Tippy Pad is a pad that is placed over the seat of the safety car seat. It is sufficient to rest it on the seat; it is necessary to pass the leg belt of the seat through the appropriate buttonhole created on the Tippy Pad. The child, in these conditions, can in no way remove or deactivate it.
Yes, It is possible to place the Tippy Pad on these types of seats. To prevent it from being tampered with, you can place the Tippy Pad between the seat cover and the plastic body. Alternatively, you can use a few strips of velcro (not included).
Digicom does not sell Tippy Pads directly to the final consumer, but uses distribution chains and individual retailers both online and offline. To find out where to buy the product or look for the nearest point of sale, visit the official website at this link
If you forget your smartphone at home, you will not be notified that it has been activated. If you forget your smartphone in your car, you will not receive any alarm notifications. Product developments are underway to deal with these possible cases.
Tippy Pad is compliant with the requirements of the decree law, therefore Digicom has compiled the declaration of conformity taking full responsibility for the functionality of the device. The declaration can be downloaded from the official website at this link.
The Tippy Pad is composed of: a pad and an application. It is therefore a high-tech system. Those who buy it are aware that the device, as it is composed, to function and comply with legal requirements, must have Bluetooth active and of course smartphones on and efficient. Once the first configuration has been carried out, the user only needs to have a phone with an active app (even in the background) and Bluetooth on to automatically detect the presence of the child.
No, in order to be able to work and comply with the requirements of the decree must have the Bluetooth and the app (even in the background) active, without them could not give the confirmation of mandatory activation to the user.
Tippy Pad is a product that can be adapted to all child seats and complies with the text of the decree. The technology and reliability of the Tippy Pad device have been adopted by the most important manufacturers of restraint systems. Tippy Pad has carried out severe crash tests in compliance with the ece r44 and ece r129 standards at the csi on a significant number of seats, indicating that the product has no influence on the safety of the restraint system. Tippy Pad has a thickness and a fabric specifically designed to avoid compromising safety when travelling.
Tippy uses a pressure presence sensor to work on condition that the seat of the seat is able to comfortably accommodate the cushion, (which measures 30×20 cm) the device can be considered compatible, possibly after adopting some precaution to make it stable on the seat (such as applying Velcro if the seat is not equipped with a central fixing strap) if necessary. A true weight limit is not indicated. The device is suitable for children up to 12 years of age and with a height not exceeding 150 cm